The cluster at a glance¶
This page lists the values of the SC cluster that this guide uses. They
were checked on 20 October 2026 with sinfo and scontrol on the
cluster and against the SC documentation,
and they can change. sinfo -s on the login node shows the partitions as
they are today.
Machines¶
| Short name | Host | What for |
|---|---|---|
sc-login |
login01.sc.uni-leipzig.de |
starting jobs and looking at them, never computing |
sc-export |
export01.sc.uni-leipzig.de |
moving files to and from the cluster |
| — | portal.sc.uni-leipzig.de |
your account, your SSH key, support requests |
| — | lab.sc.uni-leipzig.de |
Jupyter in the browser |
| — | rstudio.sc.uni-leipzig.de |
RStudio in the browser |
| — | www.sc.uni-leipzig.de |
the SC documentation |
The names sc-login and sc-export come from the SSH settings that the
setup guide writes in step 5.
These are the fingerprints of the servers' keys, the same as on the SC page SSH host keys:
| Host | Type | Fingerprint |
|---|---|---|
| login01 | ED25519 | SHA256:3saqgn+bVpG3PyG7mtwM2nPQY0NfK9auNCxLCWb85wQ |
| login01 | ECDSA | SHA256:IOSVuQ/ip4FiXKZicXAYChm0KiibigU10KHzTREbhrs |
| login01 | RSA | SHA256:02tNZqOPx+eqt7kIZbJaw2Vz6vaK7sj8iBbwm5yNyj8 |
| export01 | ED25519 | SHA256:5lwMCnUQYG50VHNRKULsTdcF1tHGm+FZ8duSEJTppNA |
| export01 | ECDSA | SHA256:xYK3VypMR/nMYJFLi6yvrHtKearKMSxzlznxYacZe68 |
| export01 | RSA | SHA256:GqM5sPXxQ0RNoTkqwVO+m11ATEYaK4pmKsBBYX2qY7A |
Partitions¶
The table shows the computers of each partition and their sizes as
sinfo reports them. The SC page
Hardware
describes them in more detail.
| Partition | Machines | Cores per machine | Memory per machine | GPUs per machine | Memory per core, at most |
|---|---|---|---|---|---|
cpu-xeonv3 (default) |
80, t001 to t080 |
16 or more | 125 GB | — | 12.5 GB |
cpu-zen3 |
32, paul01 to paul32 |
128 | 500 GB | — | 93.75 GB |
cpu-zen1 |
10, polaris01 to polaris10 |
32 | 248 GB | — | 15.6 GB |
cpu-bigmem |
1, sirius01 |
128 | 5.9 TB | — | 93.75 GB |
gpu-a30 |
12, paula01 to paula12 |
128 | 981 GB | 8 × A30, 24 GB each | 15.3 GB |
gpu-l40s |
4, firehorse01 to firehorse04 |
144 | 376 GB | 4 × L40S | 31.25 GB |
gpu-v100 |
6, clara |
32 | 500 GB | 4 × V100, 32 GB each | 31.25 GB |
gpu-rtx2080ti |
18, clara |
32 | 500 GB | 8 × RTX 2080 Ti, 11 GB each | 31.25 GB |
The code-alongs use cpu-xeonv3 and gpu-a30. The SC documentation
still uses older names for the same computers, such as paul, paula,
clara, polaris, sirius and t3000. sinfo lists both kinds of
name.
GPUs¶
A job script books a GPU with #SBATCH --gpus=TYPE:COUNT, for example
--gpus=a30:1. The types are a30, l40s, v100 and rtx2080ti.
PyTorch from PyPI brings CUDA 13, which needs GPU driver 580 or newer and does not support the V100, as a notice of PyTorch explains. The A30 and L40S have driver 580.178.04, so the GPU code-alongs book an A30.
Limits¶
Slurm treats each run as a job of its own. So these limits, and the wait
as PENDING, apply to every run: to each line of runs.txt, or to the
single run of a job without it.
| Limit | Value |
|---|---|
| time of a run | at most 2 days (--time=2-00:00:00); 1 hour if the job script sets no --time |
| memory of a run | 1 GB per booked core if the job script sets no --mem; the most per core is in the table of partitions |
| runs of a job | at most 99,999 (MaxArraySize=100000) |
| end at the time limit | Slurm sends the program the signal TERM and ends it 30 seconds later (KillWait) |
A job that asks for more than its partition allows is refused by
sbatch at once and never waits (EnforcePartLimits=ANY).
Each core comes with a share of memory, as the table of partitions shows. A job that asks for more memory than its cores come with also gets more cores, as the SC page Slurm explains.
Longer jobs run in the partitions whose names end in -long, such as
cpu-zen3-long with 10 days or cpu-zen1-long with 42 days. They are
open only to groups that SC lets in, and sinfo -a -s lists them.
Without access, sbatch stops with
User's group not permitted to use this partition. Ask SC support for
access.
Modules¶
This guide uses two modules:
| Module | Used by |
|---|---|
R/4.5.2-gfbf-2025b |
first-jobs/hello-r.slurm, the R code-alongs |
Python/3.12.3-GCCcore-13.3.0 |
first-jobs/hello-python.slurm, the code-along on long runs |
module spider R on the login node lists all versions of R, and the SC
software catalogue
lists all software. The Python code-alongs with packages install their
own Python with uv instead.